33CC Weed Wacker, Gasoline Power 2-Stroke String Trimmer Weedeater, Cordless Weed Eater with Single Cylinder Air-Cooled Engine, Lawn Mower Grass Trimmer for Home Lawn Mowing, Bushes Cutting

<p>Specification</p> <p>Color: Red, Silver/Material: PP, Aluminum Alloy, Manganese Steel, Nylon/Assembly Required: Yes/Usage: Side-mounted/Displacement: 33cc/Power: 0.81kw/Rotation Speed: 8500r/min /Engine Type: Single-cylinder Air-cooled 2-stroke Gasoline Engine /Carburetor Type: Diaphragm Carburetor/Gasoline Oil Mixing Ratio: 20-25:1&nbsp; /Idling Speed: 2800-3200r/min&nbsp; /Fuel Tank Volume: 1000ml /33.8 Oz/Operating Noise: About 110db/Engine Size: 26*22*27cm/10.24*8.66*10.63in/Product Length: 1.75m/5.74ft/Gross Weight: 8.8kg/19.4 lbs /Package Size: 107*27*27 cm/42.13*10.63*10.63&nbsp;in</p> <p>Package Included</p> <p>1 * Weed Wacker/1 * Oil Pot/1 Pair* Goggles /1 * Funnel/1 * Carrying Strap/1 * English Manual/All Accessories for Installation</p> <p>Notes</p> <p>1.&nbsp;The oil mixture ratio should not be wrong or deviated.&nbsp;Please do not use poor-quality motor oil as the matching motor oil.</p> <p>2.&nbsp;Please check whether the blade tool is firmly installed before starting the engine, and check whether the blade tool is intact after each work. When starting the engine, personnel need to stay away from 32.81ft or more. Please wear gloves(not included) and goggles during use. &nbsp;&nbsp;&nbsp;</p> <p>3.&nbsp;Please change the engine oil of the new machine every 4 hours of work and every 20 hours of work after 5 times (change the oil when the engine is warm). Please check the oil before each work to see if it is missing and add it to the right position. Fuel needs to be replenished as it is used.&nbsp;Refueling should be kept away from the fire source for more than 49.21ft, and open flame operation such as smoking is prohibited.</p> <p>4.&nbsp;The sponge filter inside the air filter needs to be cleaned every 50 hours of work (the cleaning cycle should be shortened when the working environment is dusty), and it can be cleaned with detergent, shampooed with water, and dried before re-installing the air filter.</p> <p>5.&nbsp;Before turning off the engine, it should idle for 1-2 minutes to facilitate the natural heat dissipation of the engine.</p> <p>6.&nbsp;The blade work head gearbox is filled with grease once every 20 hours of work to provide internal gear lubrication to reduce wear and improve life.</p> <p>7.&nbsp;The short flexible shaft and hard shaft inside the connecting disk should be withdrawn after each working cycle, greased and maintained, and then reassembled.</p> <p>8.&nbsp;Please check the engine air inlet, cylinder heat sink, and high-pressure package frequently to remove weeds and dust at the air inlet to ensure smooth air ducts and avoid pulling cylinder damage caused by high engine temperature.</p> <p>9.&nbsp;If you do not use the machine for more than 10 days, please pour out the oil in the gasoline&nbsp;and engine oil, and press the oil bubble to drain the fuel in the carburetor to avoid damage to the engine caused by oil deterioration.</p> <p>10.&nbsp;If the machine is not used for a long time, please put the machine in a dry and ventilated place, and empty the fuel. Please avoid the high-pressure cap, spark plug, etc. from being unable to start due to humidity, rust, and inversion.</p> <p>11.&nbsp;When the old machine is used the next year, please check the spark plug cap for rust and corrosion first to avoid weak power generation, which makes it difficult to start. After starting, it needs to idle for 10 minutes to see if the parts are working properly.</p> <p>12.&nbsp;Work Check:</p> <p>Please check daily if the oil is sufficient, visually at the threaded port position, and add appropriately if it is missing.</p> <p>Please check daily whether the air filter is too dirty. Please use pure gasoline&nbsp;to clean the air filter sponge.</p> <p>Please check whether the throttle cable is stable in the carburetor position before work.</p> <p>Please check whether the blade is in good condition before work, and do not use a damaged blade.</p>

• This string trimmer is designed for efficient lawn and bush trimming. It features a 33cc single-cylinder air-cooled 2-stroke gasoline engine for powerful performance.
• The weed wacker is constructed with durable materials including PP, aluminum alloy, manganese steel, and nylon. These materials ensure high hardness, abrasion resistance, and corrosion resistance.
• This gas-powered string trimmer is suitable for home lawn mowing and cutting bushes. It is ideal for use in gardens, orchards, and vineyards.
• The trimmer has an adjustable handle position for improved control and ease of use. It also features a cordless design for greater flexibility during outdoor tasks.
• Regular maintenance includes checking and refilling engine oil after every 4 hours of operation. Fuel should be replenished away from fire sources to ensure safe usage.